Доставка из: Германия; Frame Builder's Carbon primer by Spray.Bike - primer for your carbon bike Frame Builder's Carbon Primer from Spray.Bike is a transparent primer specially developed for raw carbon frames. Treat your carbon or resin composite frame and then apply remarkably strong holding Spray.Bike paint! Specifications: Designation: Spray Bike Acrylic Paint in Aerosol Application Area: fram... Подробнее...
Мы предоставляем доставку во все популярные страны мира разнообразными способами.
+ПодробнееНаша служба поддержки поможет Вам в выборе товара и подскажет по любым вопросам.
+ПодробнееЕсли Вам по каким-то причинам не подходит товар - то готовы рассмотреть возврат товара
+ПодробнееДоставка из: Германия;
Frame Builder's Carbon primer by Spray.Bike - primer for your carbon bike
Frame Builder's Carbon Primer from Spray.Bike is a transparent primer specially developed for raw carbon frames. Treat your carbon or resin composite frame and then apply remarkably strong holding Spray.Bike paint!
Specifications: Designation: Spray Bike Acrylic Paint in Aerosol Application Area: frame, fork and all parts to be painted Features: strong adhesion primer for Spray.Bike paints ideally suited for carbon no subsequent heat treatment necessary with 400 ml a common bicycle incl. fork can be treated with one layer Application: use Spray.Bike only on clean, dry surfaces wear gloves, protective clothing and breathing mask always paint outdoors shake spray can vigorously for approx. 3 minutes before use take 2-3 test sprays before use spray only with a spray can in vertical position (at least 20 cm spray distance) keep the spray can moving at all times during the spraying process allow primer to dry completely (10 - 15 minutes) paint with desired colour and treat further
Manufacturer's Warning: Optimum ambient temperature while spraying: 20-25°C. Do not use Spray.Bike at outside temperatures below 10°C, above 35°C or at a relative humidity level greater than 75%. Keep the can well-protected from sunlight and ambient temperatures above 50°C/122°F. CLP Regulation Label:
Signal Word: Danger Hazardous Components: acetones, cylenes, 2-methoxy-1-methylethyl acetate
Hazard Warnings: H222 Extremely flammable aerosol.
H229 Pressurized container: may burst if heated.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
Safety Information: P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P210 Keep away from heat, hot surfaces, sparks, naked flames and other sources of ignition. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P280 Wear protective gloves / protective clothing / eye protection / face protection.
P410+P412 Protect from sunlight. Do not expose to temperatures above 50 °C / 122 °F.
P501 Disposal of contents/container in accordance with local / regional / national /
international regulations.
Manufacturer: Cosmos Lac AE
1 Pindou Street, Kallithea 17672, Athens. Greece
Phone: +30 2109570222
Fax: +30 2109566671
[email protected]
http://www.cosmoslac.com
Models: 400 ml:
Nominal Amount: 400 ml Packaging Type: spray can Contents: 1 x Spray.Bike Frame Builder's Carbon primer
Товары, которые могут Вам понравиться.
Женщинам
Мужчинам
Детям
Обувь
Сумки и чемоданы
Аксессуары