Neumann MA 1 thumb

Neumann MA 1

Артикул: REC0015275-000; Доставка из: Германия; Neumann MA 1 Reliable monitoring in every roomThe Neumann MA 1:Calibration algorithms developed jointly with Fraunhofer IIS.For stereo setups with KH 80 DSP and all analog (non-DSP-based) Neumann monitors in conjunction with the KH 750 DSP subwooferIndividually calibrated measurement microphoneRoom-adaptive target curvePhase and amplitude op... Подробнее...


  • 37337руб.
  • 48538руб.

Количество:



Категории: Аудиотехника, Микрофоны, Вокальные микрофоны

УДОБНАЯ ДОСТАВКА

Мы предоставляем доставку во все популярные страны мира разнообразными способами.

+Подробнее

ОНЛАЙН ПОДДЕРЖКА

Наша служба поддержки поможет Вам в выборе товара и подскажет по любым вопросам.

+Подробнее

ВОЗВРАТ ТОВАРА

Если Вам по каким-то причинам не подходит товар - то готовы рассмотреть возврат товара

+Подробнее

Артикул: REC0015275-000;
Доставка из: Германия;

Neumann MA 1
Reliable monitoring in every room
The Neumann MA 1:
  • Calibration algorithms developed jointly with Fraunhofer IIS.
  • For stereo setups with KH 80 DSP and all analog (non-DSP-based) Neumann monitors in conjunction with the KH 750 DSP subwoofer
  • Individually calibrated measurement microphone
  • Room-adaptive target curve
  • Phase and amplitude optimization for analog Neumann monitors
  • For Mac and PC
Hardware requirements
  • 1 pair of KH DSP speakers or 1 KH 750 DSP subwoofer in combination with a pair of analogue (non-DSP based) KH speakers
  • Computer (Windows 10 64 Bit and macOS 10.13, 10.14 or 10.15)
  • Audio interface with balanced analog input with 48V phantom power and 2 balanced respectively analog outputs, digital AES/EBU or S/PDIF output (KH 750 DSP only)
  • Network switch
  • if required
Software Requirements
  • Operating system: Windows 10 64 Bit or macOS 10.13 upwards
  • Neumann Automatic Monitor Alignment Software (download)
  • ASIO driver (for Windows)
DSP-based Sound Solution for Studio and Hifi
Neumann's Automatic Monitor Alignment is a dedicated application for KH 80 DSP stereo sets with or without the KH 750 DSP subwoofer respectively two non-DSP-based monitors of the KH-Line, which are driven by the analogue outputs of the KH 750 DSP. The KH 750 DSP subwoofer can also be used to automatically adjust analog KH Series studio monitors.

The great advantage over previous calibration solutions lies in the new calibration algorithms, which were developed together with the Fraunhofer Institute for Integrated Circuits (IIS) specifically for Neumann studio monitors. Neither a plug-in nor a special audio driver is required: The alignment data is stored and processed in the DSP monitors. This optimizes not only the amplitude frequency response, but also Phase.

Due to the independence from computers after the successful calibrate, such a system is not only interesting for professional sound studios but also for demanding hifi enthusiasts. In terms of price, it is also extremely interesting compared to other monitoring and hi-fi systems of this quality level.
The following speakers and subwoofers are network-compatible and can be controlled directly by the software:
  • KH 80 DSP
  • KH 750 DSP
The following speakers are not networkable and must be connected through a networkable subwoofer to be included in the system setup:
  • KH 120 A
  • KH 120 D
  • KH 310 A
  • KH 310 D
  • KH 420/KH 420 + DIM 1
Digital is the best way to go here

For correct operation of the MA-1, in addition to a DSP-based Neumann subwoofer or loudspeaker pair for each DSP device, a LAN cable for control, possibly 2 XLR cables for connecting the loudspeakers and a network switch and another LAN cable for the computer are required. The MA-1 measurement microphone is operated at the microphone input with 48V phantom power of an audio interface. If the system is to be powered via the digital input of the subwoofer/speaker, a digital audio output is also required on the interface.

All in all, there are several possibilities for the connection from the interface to the box(es):

  • AES/EBU: The digital output in XLR format requires a line with 110Ohm impedance, but the unbalanced AES3 input with BNC socket at the box requires a signal with 75Ohm source impedance. Strictly speaking, an must be connected in between.* This method achieves the best results. Experience has shown, however, that an is sufficient.
  • S/PDIF: The specifications of the S/PDIF standard are included in the AES3 standard. So an S/PDIF output can be connected to the BNC input with a simple or adapter cable and will be recognized by the DSP without any problems.
  • Analog: It is of course equally possible to drive the DSP via the analog XLR input and at the same time benefit from the advantages of speaker correction with the MA-1. In this case, however, you have to accept an additional conversion step (analog input to DSP).

Detailed documentation and the required, free Neumann Automatic Monitor Alignment software are available in the .

Please be sure to switch off Direct Monitoring on the interface during the calibration process; otherwise you risk damage to your loudspeakers due to a feedback loop! To do this, turn the source selector from Input to DAW, if necessary.

This task can also be performed by a suitable resistor network (T-element).

Manufacturer information
Georg Neumann GmbH
Leipziger Str. 112
10117 Berlin
Germany
[email protected]
304177240
Show productinformation from Neumann


Фото товара

Добавить Отзыв

Похожие товары

Товары, которые могут Вам понравиться.

Последние просмотренные

Подпишитесь на нашу рассылку

Сайт работает на платформе Openmall

О НАС

ТЕХНИКА

ПОМОЩЬ

ДОСУГ

КАТАЛОГ

АКСЕССУАРЫ

КАБИНЕТ

ПОПУЛЯРНОЕ

Введите свой e-mail и получите скидку

5%

на Ваш первый заказ