Eurolite THA-150F Theater-Spot

The Eurolite THA-150F Theater-Spot is a stepped lens headlamp with a special 170 watt COB LED that generates light in warm white and amber. These two colours can be called up separately on request, but can also be called up with only one channel as a so-called Dim-To-Warm function. This means that with decreasing brightness, the color temperature also decreases. So it perfectly imitates the behaviour of an incandescent lamp which, when dimmed, also produces gold-orange light.

In order to produce very even gradients, it is possible to dim the overall brightness in 16-bit resolution. From 255 single steps of the brightness control then become over 65,000 steps. In addition to a strobe effect, the Eurolite THA-150F also features a motorized Zoom DMX command that changes the beam angle from 8° to 39°. Thanks to its high colour rendering index of over 90, the spotlight is ideal for theatre applications.

Included in the delivery is a door panel with 4 gates, which can be rotated steplessly and thus allows shading in all directions. In addition, the spotlight has a lockable mounting bracket for installation on a tripod or on a truss. Additional rubber feet allow the THA-150F to be placed on the floor.

It Eurolite THA-150F Theater-Spot can be operated in stand-alone mode or via DMX with a choice of 2.6 or 7 DMX channels. The functions can be conveniently addressed and set via the control unit with LCD and the four control buttons on the rear of the headlamp. The mains connection is made via a high-quality Neutrik PowerCon socket. The matching mains cable with earthing contact plug is included in the scope of delivery. Finally, the Eurolite THA-150F has a loop-through output for powering up to eight devices.

• Functions: Dimmer with 8 or 16 bit resolution, strobe effect with variable speed and via random generator, motorized Zoom
• Various dimmer curves adjustable via the control unit
• LED technology that simulates the colour temperature curve of a halogen lamp during dimming
• Zoom adjustable via DMX or directly on the device
• Brightness can be adjusted directly on the device via rotary knob
• Equipped with a warm white/amber COB LED (2in1)
• Infinitely variable WW+A colour mixing
• Colour rendering (CRI) >90
• Light emission via Fresnel lens
• metal casing
• Mounting bracket for installation on a tripod or on a traverse
• Locking possibility at the bracket
• Temperature protected handle
• Additional rubber feet if the spot is to be placed on the ground
• Rotatable sash limiter and colour filter frame included in scope of delivery
• 2, 6 or 7 DMX channels selectable
• DMX-controlled operation or stand-alone operation
• DMX512 control possible via any commercially available DMX controller
• Supports RDM (Remote Device Management)
• Fan cooled
• Convenient addressing and setting via control unit with LCD and four operating keys
• Mains connection via Neutrik PowerCon -socket and enclosed mains cable with earthing contact plug
• Loop-through output for power supply of up to 8 devices
• Housing colour: Schwarz
• Projection: flicker-free
• Colour rendering index (CRI) greater than: 90 Ra
• Control: DMX
• LED: 1 x COB (chip-on-board) 170 W Dim to warm WW (homogeneous colour mixing)

• Power supply: 100-240 V AC, 50/60 Hz
• Total connected load: 150 W
• DMX channels: 2/6/7
• DMX connector: 5-pin and 3-pin XLR
• LED type: COB 170 W (2in1), warm white/amber
• Number of LEDs: 1
• Beam angle: 8-39°.
• Subject to ecodesign: Yes
• Special product: Not intended for room lighting in households.
• Intended use: Lighting for show effects
• Fan: Yes, temperature controlled
• Protection class: IP20
• Beam angle: 8 - 39°.
• length: 45,7 cm
• width: 33,6 cm
• height: 39,8 cm
• Weight: 9,40 kg
• Equipment: Zoom motor
• DMX channels: 2; 6; 7
• LED: 1 x COB (chip-on-board) 170 W Dim to warm WW (homogeneous colour mixing)