Rode RodeCaster Pro II

• Fully integrated standalone device with intuitive operation
  
• For podcasters, streamers, musicians and content creators
  
• 4 Neutrik combo inputs (XLR/6.35mm) for microphones, guitars, Bass and keyboards
  
• Ultra-low noise Preamps with +76dB gain
  
• Dual USB audio interface for simultaneous connection of 2 computers or mobile devices
  
• Wideband Bluetooth for first-class voice quality and wireless monitoring
  
• 9 freely assignable channels for individual configuration of the mixer
  
• 6 faders, 3 virtual faders
  
• Assignable signal sources: 4x XLR/6.35mm, Bluetooth, USB 1, USB 2, SMART Pads
  
• 8 programmable SMART pads with 8 banks and 2 bank change buttons (for 64 actions)
  
• For triggering audio, effects, MIDI commands, mixer actions and image changes
  
• 4GB internal memory for SMART Pad audio files
  
• 5.5-inch HD touchscreen
  
• Navigation encoder with print function for precise parameter settings
  
• Professionally programmed channel presets
  
• With APHEX signal processing: Aural Exciter, Big Bottom, Compellor
  
• Included studio effects: EQ, Compressor, Reverb, Delay, Pitch Shift, Robot Voice
  
• With mix-minus and ducking functions
  
• Stereo and multitrack recording to microSD, USB storage device or computer
  
• 4 headphone outputs, 2 balanced line outputs (6.35mm each)
  
• Wi-Fi and Ethernet connection possible
• Dimensions: 30.5 x 27 x 6cm
  

• 1x RODECaster Pro II
  
• 1x power supply
  
• 1x USB-C to USB-C cable (3m)
  

• Inputs: 4x Neutrik combo (Mic/Line/Instrument).
• Impedance microphone inputs: 4 kOhm
• Line/Instr. inputs: 6.35mm TS (Line/Instr. switchable)
• Impedance instrument inputs: 1MOhm
• Equivalent input noise: -131.5dBA
  
• Dynamic range: 113dB
  
• Frequency response: 20Hz - 20kHz
  
• Maximum output level: +4dBu
  
• Headphone outputs: 4x 6.35mm TRS (stereo)
  
• Headphone amplifier: 250mW @ 32Ohm
  
• Line outputs: 6.35mm TRS (L/R), balanced
  
• Bluetooth: Receiver + Transmitter, wideband Bluetooth for superior voice quality,
  
• USB Audio Interface 1: 2 In/16 Out (Multitrack) or 2 In/2 Out with mix-minus switching
  
• USB Audio Interface 2: 2 In/2 Out with mix-minus switching
  
• Digital conversion (maximum): 24Bit / 48kHz
  
• Recording: to microSDHC or microSDXC card (not included)
  
• Data transfer: USB 3.0 SD card reader with 130MB/s
  
• USB recording: via USB-C to Mac, PC respectively iOS or Android device.
  
• USB recording (external storage device): via USB-C (exFAT, at least 100MB/s)
  
• Network: Wi-Fi 802.11g/n/ac 2.4GHz respectively Ethernet 100/1000
  
• Power supply: 30W USB-C PD (15V, 2A), power adapter included in delivery
  

• Windows 10 version 1803 or higher
  
• macOS X 10.15 or higher
  
• Android 9.0 or higher (device must support digital audio over USB-C)
  
• iOS 13 or higher (optional connection cable SC15 required)
  

The RODECaster Pro II is a multi-function console for producing and streaming podcasts, interviews or radio shows. In addition, it can also be used as an audio interface for recording music and vocals. Rode has placed particular emphasis on user-friendliness here: Two external devices can be supplied with signal simultaneously via USB, Bluetooth devices can also be used as feed players, SMART pads can be assigned various functions and 4 headphones can be operated simultaneously.

The RODECaster offers a wide range of connection options. A total of 4 microphones or instruments can be connected to the high-quality preamps with up to +76dB gain. Both USB ports, Bluetooth or stored sound files that are played via theSMART Pads serve as additional feeds. Very handy for streaming is the integrated Wi-Fi and Ethernet connection to connect the RODECaster directly to the Internet. Also, up to 4 separate headphones can be supplied with signal, so that streams and productions with up to 4 participants are possible. In addition, a pair of stereo speakers can be connected via jack for use at a studio.

Pre-programmed sound presets and a range of editing tools allow intuitive tuning of a professional radio sound. In addition, effects and modulations such as reverb, delay, pitch shift or robot voice can be used to enrich the sound of your recordings and podcasts. For fast availability, these can also be placed on corresponding SMART Pads.